Lian Li 011 Dynamic XL Midi Tower White

ST-DA2S

SST-RM42-502

FD-C-MES2X-02

SST-RM400

SST-RM41-506

The DA2 is a compact ITX case designed to strike a balance between size and compatibility, allowing for high-performance components to fit comfortably in a small form factor space. What truly sets the DA2 apart from other SFF cases is its unique approach to mounting components. It utilizes a rail and bracket system that makes it incredibly versatile, greatly improving the range of hardware and type of systems it can be used for. Cooling performance was another critical consideration throughout the design process, not only will the DA2 support 145mm tall air coolers or a 280mm radiators, it provides excellent airflow for them to run at maximum efficiency and minimal noise.

Dual-purpose chassis - Industrial / Home
Designed for industrial rackmount or high-end home system usage, which can be placed in vertical or horizontal placements.

Distinctive exterior
Distinctive front panel features anti-theft lock design to provide additional security along with one USB Type-C interface.

Cooling capabilities
RM42-502 comes pre-installed with 1 x 120mm fan at the front and 1 x 80mm fan at the rear achieving front-to-back directional airflow out of the box, and unlike most rackmounts cases on the market, RM42-502 supports up to 240mm liquid cooling radiators.

Anti-sag prevention
To avoid any unforeseen damages to either the motherboard or the graphics card, RM42-502 comes with an expansion card retainer that keeps your graphics cards in place when moving and to prevent it from sagging.

Storage bays
Offers users a wide range of hard drive options including support for two 5.25" drive bays directly compatible with 3.5" or 2.5" drives.

Sliding rail compatibility
Reserved mounting holes for sliding rails which can be easily installed. Can be used with the RMS06-22 rail (sold separately).

Bigger, bolder and better? With more of everything, the Meshify 2 XL is ready to take on your most ambitious builds.

Detachable front filter
- The nylon filter is easily removed from the hinged mesh panel for increased airflow
- Tether-free bezel for easier access to front fan mounts
- Three pre-installed Dynamic X2 GP-14 fans and room for more (max 9x 140 mm / 11x 120 mm)

Superlative storage
- Optional accessories allow expansion up to 18 HDDs and 5 SSDs in Storage Layout
- The included Multibrackets lets you convert any unused fan positions to HDD, SSD or pump mounts
- Tool-less, top-latching panels allow quick access while preventing accidental drops

Flexible dual-layout design
- Convert to Open Layout and get more than enough room for your custom water loop with large reservoirs and radiators up to 480 mm
- Support for radiators up to 480/420 mm (front), 480/420 mm (top) and 280/240 mm (base)
- An expansive internal layout easily accommodates large motherboards up to E-ATX and SSI-EEB

Open and interchangeable
Remove the entire top to build and route with zero hindrance.

Type-C interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10Gbps

Nexus+ 2 fan hub
Ultra-slim Nexus+ 2 fan hub connects 3x PWM fans and 6x 3-pin fans

Versatile multibrackets
The included Multibrackets lets you convert unused fan positions to HDD, SSD or pump mounts

Easy cable management
Detachable PSU cable shield and integrated cable guides with velcro straps further simplify cable management behind the board

No

Distinctive exterior Distinctive front panel features a handle design allowing for easy accessibility to the internal components, along with two USB 3.0 data transfer ports Storage device performance Supports optional 5.25” storage devices: FS204, FP510, FS305, FS305-12G Storage bays Offers users a wide range of hard drive options including support for 5.25"/3.5"/2.5" hard drives and slim optical drives Internal configurations - Length limitation: 7.87” (200mm) - Supports ATX (PS2) / Mini Redundant - Supports up to SSI-CEB (12" x 10.5") motherboards Cooling capabilities Utilizing the typical front-to-back directional airflow, RM41-506 comes pre-installed with two 80mm PWM fans for exhaust, designed to achieve a rapid heat dissipation effect that does not easily accumulate hot air inside Sliding rail compatibility Reserved mounting holes for sliding rails which can be easily installed. Can be used with the RMS06-22 rail

SFF Mini Tower, Mini-ITX, Mini-DTX, 3 x 3.5″ or 6 x 2.5″, USB Type-C 3.0, silver

4U, Steel, SSI-EEB, SSI-CEB, Extended ATX, ATX, Micro-ATX, Mini-ITX, Black, 5.25" x 2, 2.5" x 1, PS2 (ATX) (PSU + optical drives / 5.25" devices = 442mm) / Mini Redundant, USB Type-C x 1, USB 3.0 x 2, Audio x 1, MIC x 1, Power status x 1, HDD activity x 1

Meshify 2 XL Light Tempered Glass E-ATX/ATX/mATX/Mini-ITX/EE-ATX/SSI-CEB/SSI-EEB, 2xUSB 3.0, USB 3.1 Gen 2 Type-C, Mic, Audio, Steel

Server case, 4U, CEB/ATX/Micro ATX/Mini-ITX, 3 x 5.25", 430 x 176 x 469 mm, 10.8 kg

1

Streacom

Silverstone

Fractal Design

Silverstone

Silverstone