|
Description
|
The DA2 is a compact ITX case designed to strike a balance between size and compatibility, allowing for high-performance components to fit comfortably in a small form factor space. What truly sets the DA2 apart from other SFF cases is its unique approach to mounting components. It utilizes a rail and bracket system that makes it incredibly versatile, greatly improving the range of hardware and type of systems it can be used for. Cooling performance was another critical consideration throughout the design process, not only will the DA2 support 145mm tall air coolers or a 280mm radiators, it provides excellent airflow for them to run at maximum efficiency and minimal noise.
|
Dual-purpose chassis - Industrial / Home
Designed for industrial rackmount or high-end home system usage, which can be placed in vertical or horizontal placements.
Distinctive exterior
Distinctive front panel features anti-theft lock design to provide additional security along with one USB Type-C interface.
Cooling capabilities
RM42-502 comes pre-installed with 1 x 120mm fan at the front and 1 x 80mm fan at the rear achieving front-to-back directional airflow out of the box, and unlike most rackmounts cases on the market, RM42-502 supports up to 240mm liquid cooling radiators.
Anti-sag prevention
To avoid any unforeseen damages to either the motherboard or the graphics card, RM42-502 comes with an expansion card retainer that keeps your graphics cards in place when moving and to prevent it from sagging.
Storage bays
Offers users a wide range of hard drive options including support for two 5.25" drive bays directly compatible with 3.5" or 2.5" drives.
Sliding rail compatibility
Reserved mounting holes for sliding rails which can be easily installed. Can be used with the RMS06-22 rail (sold separately).
|
Bigger, bolder and better? With more of everything, the Meshify 2 XL is ready to take on your most ambitious builds.
Detachable front filter
- The nylon filter is easily removed from the hinged mesh panel for increased airflow
- Tether-free bezel for easier access to front fan mounts
- Three pre-installed Dynamic X2 GP-14 fans and room for more (max 9x 140 mm / 11x 120 mm)
Superlative storage
- Optional accessories allow expansion up to 18 HDDs and 5 SSDs in Storage Layout
- The included Multibrackets lets you convert any unused fan positions to HDD, SSD or pump mounts
- Tool-less, top-latching panels allow quick access while preventing accidental drops
Flexible dual-layout design
- Convert to Open Layout and get more than enough room for your custom water loop with large reservoirs and radiators up to 480 mm
- Support for radiators up to 480/420 mm (front), 480/420 mm (top) and 280/240 mm (base)
- An expansive internal layout easily accommodates large motherboards up to E-ATX and SSI-EEB
Open and interchangeable
Remove the entire top to build and route with zero hindrance.
Type-C interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10Gbps
Nexus+ 2 fan hub
Ultra-slim Nexus+ 2 fan hub connects 3x PWM fans and 6x 3-pin fans
Versatile multibrackets
The included Multibrackets lets you convert unused fan positions to HDD, SSD or pump mounts
Easy cable management
Detachable PSU cable shield and integrated cable guides with velcro straps further simplify cable management behind the board
|
No
|
Distinctive exterior Distinctive front panel features a handle design allowing for easy accessibility to the internal components, along with two USB 3.0 data transfer ports Storage device performance Supports optional 5.25” storage devices: FS204, FP510, FS305, FS305-12G Storage bays Offers users a wide range of hard drive options including support for 5.25"/3.5"/2.5" hard drives and slim optical drives Internal configurations - Length limitation: 7.87” (200mm) - Supports ATX (PS2) / Mini Redundant - Supports up to SSI-CEB (12" x 10.5") motherboards Cooling capabilities Utilizing the typical front-to-back directional airflow, RM41-506 comes pre-installed with two 80mm PWM fans for exhaust, designed to achieve a rapid heat dissipation effect that does not easily accumulate hot air inside Sliding rail compatibility Reserved mounting holes for sliding rails which can be easily installed. Can be used with the RMS06-22 rail
|
GET SOME BREATHING ROOM
The iCUE 7000X RGB is one of the most fully-featured full-towers on the market, with massive expansion capabilities.
DIMENSIONS
Over 80L in volume, the 7000 series is 40% to 60% larger than a standard mid-tower case, which gives you space for endless possibilities.
FAN CAPACITY
A spacious interior fits up to 12x 120mm or 7x 140mm cooling fans.
RADIATOR CAPACITY
Up to three simultaneous 360mm radiators (roof, side, front), two simultaneous 420mm radiators (roof, front), or even a 480mm radiator (side) means you can design your dream loop.
A FULLY-FEATURED FULL-TOWER
Even in cases as big as these, it's the little things that make all the difference. From flexible storage and cooling options to tool-free swing-out side panels and clean cable management, every element of the 7000 Series helps you make your most ambitious build a reality.
UNITE YOUR SETUP
CORSAIR iCUE software brings your entire setup together, creating a fully immersive ecosystem with intuitive control.
iCUE SMART LIGHTING CONTROL
The iCUE 7000X RGB and CORSAIR iCUE software offer best-in-class smart case technology. iCUE enables easily customizable RGB lighting and user adjustable fan speed control for up to six fans.
COMMANDER CORE XT
THE BRAINS OF THE OUTFIT
The COMMANDER CORE XT is more than just a lighting and fan controller for up to six fans. It can be expanded to monitor temperatures (two temp monitor sensors included) and even tie-into other iCUE devices like the LS100 Lighting Strips or RGB LED Lighting PRO Expansion kits.
ALL-AROUND EASY ACCESS
Three sturdy 4mm thick tempered glass panels offer a full view of your system.
THREE-SLOT VERTICAL GPU MOUNT
Put the spotlight on your graphics card with an innovative vertical GPU mount, big enough to fit today's most powerful graphics cards with plenty of room for airflow.
SHOW US WHAT YOU'VE GOT
A removable, customizable windowed PSU shroud shows off the heart of your system. Remove the panel, add vinyl graphics, laser-etch your own logo, or add backlighting to make your rig stand out.
CORSAIR RAPIDROUTE CABLE MANAGEMENT
Quickly and easily route your major cables through a single hidden channel, with a roomy 25mm of space behind the motherboard for all of your cables, easily concealed by a hinged steel door.
BUILD YOUR MASTERPIECE
The CORSAIR iCUE 7000X RGB full-tower ATX case puts your build on display behind three tempered glass panels, with room for up to three simultaneous 360mm radiators, hidden cable management, and four included CORSAIR SP140 RGB ELITE fans.
MODERN FRONT PANEL I/O
Puts your connections within easy reach, including a USB 3.1 Type-C Port, 4x USB 3.0 port, and a combination audio/microphone jack.
|
|
Short Description
|
SFF Mini Tower, Mini-ITX, Mini-DTX, 3 x 3.5″ or 6 x 2.5″, USB Type-C 3.0, silver
|
4U, Steel, SSI-EEB, SSI-CEB, Extended ATX, ATX, Micro-ATX, Mini-ITX, Black, 5.25" x 2, 2.5" x 1, PS2 (ATX) (PSU + optical drives / 5.25" devices = 442mm) / Mini Redundant, USB Type-C x 1, USB 3.0 x 2, Audio x 1, MIC x 1, Power status x 1, HDD activity x 1
|
Meshify 2 XL Light Tempered Glass E-ATX/ATX/mATX/Mini-ITX/EE-ATX/SSI-CEB/SSI-EEB, 2xUSB 3.0, USB 3.1 Gen 2 Type-C, Mic, Audio, Steel
|
Server case, 4U, CEB/ATX/Micro ATX/Mini-ITX, 3 x 5.25", 430 x 176 x 469 mm, 10.8 kg
|
1
|
iCUE, 7000X, RGB, Tempered Glass, Full-Tower, ATX, White
|
