|
Description
|
The Meshify 2 RGB is a high-performance case with a bold, stealth-inspired aesthetic. Its striking exterior features bolt-free, flush tempered glass, a fully removable top granting excellent interior access, and a front with USB-C, hinged mesh panel and removable nylon filter. The flexible dual-layout interior supports large storage arrays and multi-radiator setups that makes cooling a breeze. Refined airflow - Outstanding cooling capacity with a total of nine 120/140 mm fan mounts and four preinstalled Aspect 14 RGB PWM fans - Repositioned front fan mounting sets a wider stage for light and color - Iconic angular mesh design provides filtered airflow with a bold, stealth-inspired aesthetic Detachable front filter - Hinged removable mesh front panel and tether-free bezel for easier access to front fan mounts - Front nylon filter that can be removed for increased airflow - Easy-to-clean high airflow nylon filters on the front, top and base with full PSU coverage and convenient front access Light and color Comes with 4x Aspect 14 RGB PWM fans pre-installed Superlative storage - Convert to Storage Layout and install up to 11 HDDs alongside four dedicated SSDs mounts (6x SSD/HDD trays, 2x SSD brackets and 1x Multibracket included) - Transformable interior design utilizing a movable wall for enhancing custom builds - The included Multibracket lets you convert any unused fan position to an HDD, SSD or pump mount - Tool-less, top-latching side panels allow quick access while preventing accidental drops Extremely flexible - Support for radiators up to 360 mm in front, 360 mm up top, or 280 mm in the base in the default Open Layout - Easily holds large motherboards up to and including 285 mm E-ATX - Ventilated PSU shroud with two-part removable cover for optimal cable concealment and front radiator support - Chassis opens up to fully expose the case interior on three sides for totally unhindered installation and cable routing Type-C Interface - Three front USB ports including one USB 3.1 Gen 2 Type-C with fast charging support and speeds up to 10Gbps - Built in RGB controller on the front/top I/O with iconic Fractal Northern Lights effect Nexus+ 2 fan hub Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans and six 3-pin fans Versatile Multibracket Versatile Multibracket that converts any unused fan position to an HDD, SSD or pump mount Cable management Detachable PSU cable shield and integrated cable guides with velcro straps further simplify cable management behind the board
|
The Grandia GD10, along with GD09, is a culmination of SilverStone’s decade-long experience in HTPC case design and manufacturing into a product that every PC enthusiast can enjoy. The incredible efficiency in which it utilizes all available space results in a case that is close in size externally to Micro-ATX based GD04 and GD05, yet capable of fitting most important full size standard components including wider ATX motherboards (SSI-CEB) such as ROG or other gaming-centric models. All drive cages have been designed similarly to those from the popular ML03 case to provide maximum flexibility in drive configuration without the need for additional adapters. For cooling, all positive pressure and smooth airflow designs were retained from previous Grandia models while improvements were made to filter access for even easier maintenance. With the addition of a lockable front door, the GD10 offers an attractively sized case that is capable and user-friendly for those interested in building a system with extra security and application that exceeds typical PC or HTPC environments.
- Lockable front door ensures security of system and drives
- Positive air pressure design for excellent cooling/quietness and dust-prevention
- Support expansion cards up to 12.2 inches
- Support ATX motherboards
- Quick access filters included
- Incredible 362mm depth to fit comfortably inside home theater cabinet
- Drive cages with multi-purpose mounts eliminate need for adapters
|
The DA2 is a compact ITX case designed to strike a balance between size and compatibility, allowing for high-performance components to fit comfortably in a small form factor space. What truly sets the DA2 apart from other SFF cases is its unique approach to mounting components. It utilizes a rail and bracket system that makes it incredibly versatile, greatly improving the range of hardware and type of systems it can be used for. Cooling performance was another critical consideration throughout the design process, not only will the DA2 support 145mm tall air coolers or a 280mm radiators, it provides excellent airflow for them to run at maximum efficiency and minimal noise.
|
The Enthoo Pro 2 has been designed with extreme performance in mind, featuring Phanteks' innovative 'High-Performance Fabric' that sets a new airflow performance standard in the PC enclosure industry. The High-Performance Fabric from Phanteks, known from the award winning Eclipse P600S, bring sultimate airflow performance with much lower flow restriction copmared to any metal mesh.
|
Bigger, bolder and better? With more of everything, the Meshify 2 XL is ready to take on your most ambitious builds.
Detachable front filter
- The nylon filter is easily removed from the hinged mesh panel for increased airflow
- Tether-free bezel for easier access to front fan mounts
- Three pre-installed Dynamic X2 GP-14 fans and room for more (max 9x 140 mm / 11x 120 mm)
Superlative storage
- Optional accessories allow expansion up to 18 HDDs and 5 SSDs in Storage Layout
- The included Multibrackets lets you convert any unused fan positions to HDD, SSD or pump mounts
- Tool-less, top-latching panels allow quick access while preventing accidental drops
Flexible dual-layout design
- Convert to Open Layout and get more than enough room for your custom water loop with large reservoirs and radiators up to 480 mm
- Support for radiators up to 480/420 mm (front), 480/420 mm (top) and 280/240 mm (base)
- An expansive internal layout easily accommodates large motherboards up to E-ATX and SSI-EEB
Open and interchangeable
Remove the entire top to build and route with zero hindrance.
Type-C interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10Gbps
Nexus+ 2 fan hub
Ultra-slim Nexus+ 2 fan hub connects 3x PWM fans and 6x 3-pin fans
Versatile multibrackets
The included Multibrackets lets you convert unused fan positions to HDD, SSD or pump mounts
Easy cable management
Detachable PSU cable shield and integrated cable guides with velcro straps further simplify cable management behind the board
|
Mini-ITX cube chassis with aluminum exterior
High compatibility with no compromise
Unlike most SFF Mini-ITX chassis on the market, SUGO 15 is capable of fitting a 3 slot full length graphics cards on the left side and up to 240mm radiators on the right side.
Exceptional usability & upgradability
Modular design allows for removal of 4 aluminum panels which eases the build process and ease of upgradability at a later date.
Thoughtful design down to the details
Three magnetic nylon dust filters to prevent performance degradation along with high-grade aluminum captive thumbscrews allowing quick panel removal accessibility
|
|
Short Description
|
E-ATX/ATX/mATX/Mini-ITX, Tempered glass/Steel, 2x USB 3.0, USB 3.1 Gen 2 Type-C, Audio I/O, Power button, RGB control button
|
GD10, ATX, Micro-ATX, 2 x 3.5", 1 x 5.25", 2 x USB 3.0
|
SFF Mini Tower, Mini-ITX, Mini-DTX, 3 x 3.5″ or 6 x 2.5″, USB Type-C 3.0, silver
|
Full Tower Chassis, Steel, E-ATX , ATX, Micro ATX, Mini ITX, SSI EEB, TEMPERED GLASS
|
Meshify 2 XL Light Tempered Glass E-ATX/ATX/mATX/Mini-ITX/EE-ATX/SSI-CEB/SSI-EEB, 2xUSB 3.0, USB 3.1 Gen 2 Type-C, Mic, Audio, Steel
|
Mini-DTXMini-ITX, 3.5" x 2, 2.5" x 3, Standard PS2 (ATX), USB Type-C x 1, USB 3.0 x 2, Combo audio x 3.5mm, Aluminum, Steel, 4.25 kg
|
