|
Description
|
Display your gaming PC properly with the Kolink Unity Arena Mid Tower PC Case. This showcase features edge-to-edge tempered glass panelling, offering a panoramic view of all your high-end hardware. Plus, there are four pre-installed Kolink Umbra X ARGB/PWM 120mm fans, adorned with stunning infinity mirror effect lighting, to cast a glow and keep your components cool. Inside the spacious chassis, there is support for E-ATX motherboards, 420mm long GPUs, and three radiators simultaneously. Everything you need to craft a show-stopping PC.
The Arena Stage
The Kolink Unity Arena has been crafted to be the ultimate showcase for all your gaming hardware. The classic black finish serves as the perfect frame and backdrop, while the edge-to-edge tempered glass provides a panoramic view of the interior. Sporting a tool-less design, the side glass panel features a quick release at the back, enabling easy access to the chassis for installation and upgrades.
Adding a splash of colour, the Kolink Unity Arena has four pre-installed Kolink Umbra X ARGB/PWM fans. These will illuminate your gaming PC with an endless glow, thanks to the stunning infinity mirror effect used on the fan hub and frame edges.
Hardware Support
The spacious interior has been intelligently designed to support a comprehensive range of hardware. As such, the Kolink Unity Arena PC Case can accommodate up to E-ATX motherboards and the eight expansion slots provide ample support for PCIe devices. What’s more, there are three additional vertical slots for vertically mounting your GPU (bracket sold separately). In total, there is 420mm clearance for graphics cards, which is more than enough room for NVIDIA RTX 40 Series GPUs!
To keep the interior clean, there is a half PSU shroud, with dedicated space for ATX PS2 power supplies a maximum of 180mm long. The included drive bay supports up to four drives. Two of the slots can hold either two 2.5" or 3.5" devices, whereas the other two only hold 2.5" SSDs.
Extensive Cooling
Keeping your gaming PC cool, the Kolink Unity Arena has extensive support for both air- and water-cooling hardware. The four pre-installed fans are mounted three to the side, with a reverse blade design to provide intake, and the final one is placed on the back panel for exhaust. In addition to this, there is ample ventilation across the chassis to facilitate natural airflow.
Both the side and rear panels hold alternative fan configurations, as well as there being more support provided on the top and bottom. On the side, you can instead mount up to three 140mm fans or a 360mm radiator. Upon the rear, the other configurations are either a 140mm fan or your choice or a 120mm or 140mm radiator. The top panel offers the same support as the side, up to three 120mm or 140mm fans or 360mm radiator, whereas the bottom can hold two 120mm fans or a 240mm radiator.
All of this support culminates in the fact you can install three radiators simultaneously, facilitating an ultra-efficient thermal solution. Finally, there is 189mm clearance for CPU coolers.
Fully Featured I/O
Facilitating your connectivity needs, the Kolink Unity Arena PC Case has a fully featured I/O panel on the top panel. This includes an HD audio jack, USB 3.0, USB-C, USB 2.0, and power and reset buttons. Also included is an ARGB/PWM controller with a total of six headers.
|
The Node 304 features a unique modular interior for outstanding configurability. The Node 304 accommodates up to six hard drives. Unused mounting brackets can be removed to allow for long graphic cards, additional airflow or more space for organizing cables. Additionally, it is equipped with three hydraulic bearing fans, easy-to-clean air filters in all intakes and two front USB 3.0 ports. Featuring hybrid functionality, the Node 304 case is ideally used as a cool-running file server, a stylish and quiet home theatre PC or a powerful gaming system highlighting minimalistic and stunning Scandinavian design and maximum functionality. Key features - Compact, modular interior - Minimalistic design with an elegant aluminum front panel - Unique new modular mounting system that accommodates up to 6 hard drives - Accommodates tower CPU coolers and single-fan water cooling systems - Filtered air intakes ensure a dust-free environment for internal components - Three Silent Series R2 hydraulic bearing fans included - Excellent cooling for all components - Accommodates ATX power supplies - Fan controller for all fans included - USB 3.0 for fast file transfers
|
Introduction
Continuing where the popular Grandia GD05 left off, the Milo ML03 HTPC case again combines the full size features of Grandia series with small form factor dimensions. The slimmer Milo ML03 has a profile of 105mm height and 340mm depth, making it extremely easy to integrate into any living room furniture. Incredibly, this case can accommodate up to three 3.5” hard drives or five 2.5” HDD/SSD through its smartly designed drive cages that can mount either size without any use of adapters. For cooling, the ML03 can be fitted with up to four 80mm fans so users can choose to build a quiet system with low power components or a powerful HTPC with 140W CPU if needed. There are also numerous small touches including pre-cut hole for VGA (D-SUB) connector, Kensington lock support, and an additional full size expansion slot for installing extra motherboard I/O, fan controller, or accessories products such as CLEARCMOS. For those looking to build an HTPC with good expansion and cooling capability but has limited room and budget, the SilverStone Milo ML03 is the one to get.
Special Feature
- Support up to four 80mm fans
- Drive cages with multi-purpose mounts eliminate need for adapters
- Easy to install and cable route
- Support standard PS2(ATX) power supplies
- Support low profile expansion cards
- Includes two USB 3.0 ports
|
The Node 804 is a micro ATX chassis which focuses on cooling performance and maximum configurability, all packed in an interesting new form factor with Scandinavian elegant design.
The dual chamber layout separates hot running components from the cooler ones and allows for unrestricted airflow over the motherboard, processor and graphics card.
The case comes with three excellent 120mm fans but can be upgraded with several additional fans if needed.
Featuring plenty of options for placing water cooling components, tall heat sinks and hard drives.
The flexibility of this case really gives the users the possibility to create their optimal system build.
|
The Grandia GD09 is a culmination of SilverStone’s decade-long experience in HTPC case design and manufacturing into a product that every PC enthusiast can enjoy. The incredible efficiency in which it utilizes all available space results in a case that is close in size externally to Micro-ATX based GD04 and GD05, yet capable of fitting most important full size standard components including wider ATX motherboards (SSI-CEB) such as ROG or other gaming-centric models. All drive cages have been designed similarly to those from the popular ML03 case to provide maximum flexibility in drive configuration without the need for additional adapters. For cooling, all positive pressure and smooth airflow designs were retained from previous Grandia models while improvements were made to filter access for even easier maintenance. With the GD09, there has never been a more attractively sized HTPC case that is as capable and user-friendly. So whether one is looking to build an affordable or a powerful PC, this case can definitely satisfy both ends of the requirement.
|
Beautifully crafted and engineered to maximize cooling potential with its amazing expansion flexibiltiy, the Enthoo Pro is the budget friendly mid-tower from Phanteks. Embracing many features from the Enthoo Primo, without the price tag. This case has mulitple radiator support, removable ssd bracket, closed HDD panel, and velcro cable management. The Enthoo Pro, trying to establish its own solid reputation like the award winning Enthoo Primo.
Features:
Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks’ new redesigned and better performing SP series fans. Budget friendly case, Phanteks’ Enthoo Pro, unleash unlimited possibilities.
|
|
Short Description
|
ARGB, Glass, E-ATX, Mini-ITX, Micro-ATX, ATX, 2 x 3.5", 2 x 2.5", 1 x USB-C, 1 x USB-A 3.0, 1 x USB-A 2.0, 1 x 3.5 mm HD-Audio, 1 x Power Button, 1 x Reset Button, 235 x 495 x 440mm, 7 kg, Black
|
Node 304, Mini ITX/ DTX, 2 expansion slots, 6 x 3.5"
|
Micro ATX, Mini-DTX, Mini-ITX, USB 3.0, MIC
|
Micro ATX/Mini ITX, 3.5" x 8, 2.5" x 2, 3.5"/2.5" x 2, USB 3.0
|
ATX, Micro-ATX, 4.2kg, Black
|
Enthoo Pro, 7x 2.5", 6x 3.5", 3x 5.25", USB 2.0, USB 3.0
|
