|
Description
|
Kolink is pleased to introduce the incredibly stylish Observatory Midi-Tower with its tempered glass front- and side panel, through which users can see the total of four pre-installed RGB-LED fans in all their glory. The lighting can be controlled via the bundled controller and remote. The tidy interior of the Observatory offers lots of space for putting your hardware on show. Pre-installed dust filters, extensive space for water cooling and cable management, these are just a few of the highlights offered by this Kolink case despite its diminutive size and price. This case is almost entirely white, except for the black elements, and this helps it look extremely premium for the price.
The robust chassis is made from millimetre thick SECC steel and comes with a front and side panel in four millimetre thick glass. The entire interior is likewise coated in white and equipped with a shroud for the power supply in order to maintain an incredibly clean aesthetic. A hard drive cage is attached here with brackets for two 3,5" drives as well as space for the power supply. Four more 2,5" drives can be placed next to the motherboard. The visual highlight of the case is formed by the three 120 mm RGB fans pre-installed in the front and an additional fan in the rear. The fans possess 16 individually addressable RGB-LEDs. Their lighting can be controlled via infrared remote control using the bundled RGB controller and fan hub that can be placed in a location of your choosing. This enables 300 dynamic lighting effects to be configured. Two further 120 mm or 140 mm fans can be mounted in the roof. The three 120 mm fans at the front can be exchanged for two 140 mm fans.
Dust Filters Keep the Kolink Observatory Clean
The motherboard tray and the PSU shroud offer multiple openings for cables. A 240 mm or 280 mm radiator can be installed in the front and on the roof of the Kolink case. With air inlets are equipped with fine dust filters located in the roof and on the bottom of the case. They are easily removed without requiring tools and strengthened with a filigree honeycomb design. GPUs can be up to 38 cm long and CPU coolers may be up to 16 cm high. Additionally the I/O panel located on the front offers two USB 2.0 connections as well as a USB 3.0 Type-A port. A cut-out is present for a USB Type-C connection, however this does not come as standard with the case and must be added later. The same is true of a switch used for controlling the I/O panel's RGB lighting.
|
The Node 304 features a unique modular interior for outstanding configurability. The Node 304 accommodates up to six hard drives. Unused mounting brackets can be removed to allow for long graphic cards, additional airflow or more space for organizing cables. Additionally, it is equipped with three hydraulic bearing fans, easy-to-clean air filters in all intakes and two front USB 3.0 ports. Featuring hybrid functionality, the Node 304 case is ideally used as a cool-running file server, a stylish and quiet home theatre PC or a powerful gaming system highlighting minimalistic and stunning Scandinavian design and maximum functionality. Key features - Compact, modular interior - Minimalistic design with an elegant aluminum front panel - Unique new modular mounting system that accommodates up to 6 hard drives - Accommodates tower CPU coolers and single-fan water cooling systems - Filtered air intakes ensure a dust-free environment for internal components - Three Silent Series R2 hydraulic bearing fans included - Excellent cooling for all components - Accommodates ATX power supplies - Fan controller for all fans included - USB 3.0 for fast file transfers
|
Introduction
Continuing where the popular Grandia GD05 left off, the Milo ML03 HTPC case again combines the full size features of Grandia series with small form factor dimensions. The slimmer Milo ML03 has a profile of 105mm height and 340mm depth, making it extremely easy to integrate into any living room furniture. Incredibly, this case can accommodate up to three 3.5” hard drives or five 2.5” HDD/SSD through its smartly designed drive cages that can mount either size without any use of adapters. For cooling, the ML03 can be fitted with up to four 80mm fans so users can choose to build a quiet system with low power components or a powerful HTPC with 140W CPU if needed. There are also numerous small touches including pre-cut hole for VGA (D-SUB) connector, Kensington lock support, and an additional full size expansion slot for installing extra motherboard I/O, fan controller, or accessories products such as CLEARCMOS. For those looking to build an HTPC with good expansion and cooling capability but has limited room and budget, the SilverStone Milo ML03 is the one to get.
Special Feature
- Support up to four 80mm fans
- Drive cages with multi-purpose mounts eliminate need for adapters
- Easy to install and cable route
- Support standard PS2(ATX) power supplies
- Support low profile expansion cards
- Includes two USB 3.0 ports
|
The Node 804 is a micro ATX chassis which focuses on cooling performance and maximum configurability, all packed in an interesting new form factor with Scandinavian elegant design.
The dual chamber layout separates hot running components from the cooler ones and allows for unrestricted airflow over the motherboard, processor and graphics card.
The case comes with three excellent 120mm fans but can be upgraded with several additional fans if needed.
Featuring plenty of options for placing water cooling components, tall heat sinks and hard drives.
The flexibility of this case really gives the users the possibility to create their optimal system build.
|
The Grandia GD09 is a culmination of SilverStone’s decade-long experience in HTPC case design and manufacturing into a product that every PC enthusiast can enjoy. The incredible efficiency in which it utilizes all available space results in a case that is close in size externally to Micro-ATX based GD04 and GD05, yet capable of fitting most important full size standard components including wider ATX motherboards (SSI-CEB) such as ROG or other gaming-centric models. All drive cages have been designed similarly to those from the popular ML03 case to provide maximum flexibility in drive configuration without the need for additional adapters. For cooling, all positive pressure and smooth airflow designs were retained from previous Grandia models while improvements were made to filter access for even easier maintenance. With the GD09, there has never been a more attractively sized HTPC case that is as capable and user-friendly. So whether one is looking to build an affordable or a powerful PC, this case can definitely satisfy both ends of the requirement.
|
Beautifully crafted and engineered to maximize cooling potential with its amazing expansion flexibiltiy, the Enthoo Pro is the budget friendly mid-tower from Phanteks. Embracing many features from the Enthoo Primo, without the price tag. This case has mulitple radiator support, removable ssd bracket, closed HDD panel, and velcro cable management. The Enthoo Pro, trying to establish its own solid reputation like the award winning Enthoo Primo.
Features:
Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks’ new redesigned and better performing SP series fans. Budget friendly case, Phanteks’ Enthoo Pro, unleash unlimited possibilities.
|
|
Short Description
|
E-ATX/ATX/Micro-ATX/ITX, 4 x 2.5", 2 x 3.5", 210 x 435 x 435 mm, 2 x USB 2.0, 1 x USB 3.0
|
Node 304, Mini ITX/ DTX, 2 expansion slots, 6 x 3.5"
|
Micro ATX, Mini-DTX, Mini-ITX, USB 3.0, MIC
|
Micro ATX/Mini ITX, 3.5" x 8, 2.5" x 2, 3.5"/2.5" x 2, USB 3.0
|
ATX, Micro-ATX, 4.2kg, Black
|
Enthoo Pro, 7x 2.5", 6x 3.5", 3x 5.25", USB 2.0, USB 3.0
|
