|
Description
|
The 99CDL-8 range of "SuperSpeed USB" Type A (male) to Type B (male) cables support a data transfer rate up to 5 Gbit/s (625 MB/s), which is about ten times faster than USB 2.0 technology.
This is a Type A to A cable; it is designed to connect a Host to a Device. These cables are often used to connect a Host computer to a faceplate with a Type A socket.
Please note: This is not used to connect two computers together. Attempting to do so may damage equipment.
The official name for this cable would be USB3.2 Gen 1. (Previously known as USB3.1 Gen 1 and USB 3.0)
|
The USB 2.0 active extension cable can be used to extend the cable legth of any USB 2.0 device. The extension acts as a transparent hub and buffers all upstream and downstream traffic. This is to ensure that the signal meets the electrical and timing specifications. Using passive extension cables can result in timing errors and data loss.
|
USB 3.0 is the new standard for super speed Universal Serial Bus, USB 3.0 can support speeds up to 5Gbps. Our USB 3.0 cables are built to the USB 3.0 specification. With USB 3.0 being in it’s early stages, speeds may vary due to hardware restrictions.
|
The On The Go (OTG) cable adapter can be used on phones/tablets that support OTG to connect USB devices, you can connect devices such as flash drives, USB card readers and many other devices.
Please note that to use some devices such as pointing devices, keyboards, printers etc your phone/tablet may require a driver.
|
Connect internal USB devices directly to the motherboard header connection
The USBMBADAPT USB A to USB Motherboard Header Adapter features a 4-pin USB header (female) connection, as well as a regular USB A (female) port, allowing you to connect internal USB devices directly to the motherboard header connection. The adapter cable offers a cost-effective solution for connecting multi-function front panels, or any device that relies on using an internal USB port. Constructed of high quality materials and expertly constructed for durable performance, the USBMBADAPT adapter is backed by StarTech.com's Lifetime Warranty.
The StarTech.com Advantage
|
Connect and power your external mini-USB equipped hard drive through two standard USB ports on your computer
The USB2HABMY6 6ft USB-A to Mini-B Y cable features two USB-A male connectors and a single USB Mini-B male connector - an ideal solution for providing additional power to your mini-USB external hard drive by connecting to two USB-A ports on your computer or laptop.
Especially valuable in situations where a single USB 2.0 port may not offer sufficient power to external hard drives, the USB2HABMY6 can be connected to two ports on one PC to increase the power output to power the external device.
This 6 ft cable is backed by StarTech.com’s lifetime warranty for guaranteed dependability.
The StarTech.com Advantage
- No external power adapter required - power your external mini-USB hard drives through two USB ports on your laptop or computer
- Guaranteed reliability
|
|
Short Description
|
3 m, USB 3.0 Type A (M) to Type A (M) Data Cable
|
USB 2.0, USB A - USB A, M/F, Black, 5 m
|
USB 3.0 A Male - USB Micro B Male, 2m, 28 AWG, Black
|
USB 2.0 Micro B (M) to Type A (F) OTG Cable
|
StarTech.com 6in USB 2.0 Cable - USB A Female to USB Motherboard 4 Pin Header F/F
|
StarTech.com 6 ft USB Y Cable for External Hard Drive - USB A to Mini B
|
