|
Description
|
FULL-VIEW PC CASE
Seamless edge on front & side panel
The front and left panel employ a unique 45° beveling technique that breaks the barrier between the two pieces of glass. The extremely fine edge of the glass joint enhances the uninterrupted, panoramic, and ultra-transparent visual experience of the 270° view, allowing comprehensive showcase of high-end PC components and dazzling lighting effects.
AIRFLOW
Vertical Cooling
Can accommodate three 120mm/140mm or two 160mm fans
each on top and bottom for efficient GPU cooling.
THREE-WAY FAN BRACKET
Bottom fan configuration
Comes with interchangeable fan brackets to cater to fans of different sizes.
AIRFLOW
Dual Chamber
Independent cooling for CPU/GPU on the left side & PSU/Drives on the right side.
160*35mm Reverse Fan
Distinctive ringed air baffle enclosing the fan blades enhances the airflow and stabilizes the fan structure, accompanied by 8 damping feet to prevent resonance.
Exquisite craftsmanship
Minimal clearance between fan frame and blades, achieving maximum operational efficiency.
EXTREMELY COOL
Best Cooling Design
Support 360mm radiators on top, bottom, and side simultaneously for liquid cooling.
EXTREMELY COOL
cavernous space for extreme liquid cooling
Top, bottom and right side all support THICK 360mm radiators, providing ultra cooling capability and efficiency.
COOLING COMPATIBILITY
Best Cooling Design
Up to 10 fans simultaneously.
Supports 2 x 160mm fans on top / 2 x 160mm fans on bottom / 1 x 140mm fan at rear
DUSTPROOF DESIGN
Air intake and dust filter
TOP | Full mesh panel
RIGHT SIDE | Full mesh panel
Bottom | Full-sized pull-out dust filter
IMPRESSIVE STRUCTURE
0.8mm + 1.0mm thick steel & Tool-Free design
The ultra robust 0.8mm & 1mm steel brings unwavering protection, and the tool-free quick-release panels on the front, top and sides make the assembly and cleaning of components simplified than ever.
BUILT FOR BUILDERS
Graphics cards installation
Provides ample width to perfectly support wider RTX40 series GPU.
Supports vertical GPU riser brackets after removal.
Features 8 reusable PCIe slot covers.
POWERFUL COMPATIBILITY
POWER SUPPLY INSTALLATION
Stylish PSU bracket with rubber pad to prevent scratch
Vast room to house power supplies up to 210mm in length
Support side-interface power supplies
EVERYTHING ORGANIZED
Cable Management
Interior velcro strap x 4
Rear velcro strap x 2
Cable routing rubber grommet x 6
I/O Panel
Mainstream Type-C (10Gbps) port for high-speed transmission
Dust plugs for dust prevention
Mic/Audio 2-in-1 port
STORAGE COMPATIBILITY
Modular Drive Trays
Supports up to 6 drives: 2 x 3.5" HDD & 4 x 2.5" SSD
|
Introduction
Continuing where the popular Grandia GD05 left off, the Milo ML03 HTPC case again combines the full size features of Grandia series with small form factor dimensions. The slimmer Milo ML03 has a profile of 105mm height and 340mm depth, making it extremely easy to integrate into any living room furniture. Incredibly, this case can accommodate up to three 3.5” hard drives or five 2.5” HDD/SSD through its smartly designed drive cages that can mount either size without any use of adapters. For cooling, the ML03 can be fitted with up to four 80mm fans so users can choose to build a quiet system with low power components or a powerful HTPC with 140W CPU if needed. There are also numerous small touches including pre-cut hole for VGA (D-SUB) connector, Kensington lock support, and an additional full size expansion slot for installing extra motherboard I/O, fan controller, or accessories products such as CLEARCMOS. For those looking to build an HTPC with good expansion and cooling capability but has limited room and budget, the SilverStone Milo ML03 is the one to get.
Special Feature
- Support up to four 80mm fans
- Drive cages with multi-purpose mounts eliminate need for adapters
- Easy to install and cable route
- Support standard PS2(ATX) power supplies
- Support low profile expansion cards
- Includes two USB 3.0 ports
|
The Node 804 is a micro ATX chassis which focuses on cooling performance and maximum configurability, all packed in an interesting new form factor with Scandinavian elegant design.
The dual chamber layout separates hot running components from the cooler ones and allows for unrestricted airflow over the motherboard, processor and graphics card.
The case comes with three excellent 120mm fans but can be upgraded with several additional fans if needed.
Featuring plenty of options for placing water cooling components, tall heat sinks and hard drives.
The flexibility of this case really gives the users the possibility to create their optimal system build.
|
The Grandia GD09 is a culmination of SilverStone’s decade-long experience in HTPC case design and manufacturing into a product that every PC enthusiast can enjoy. The incredible efficiency in which it utilizes all available space results in a case that is close in size externally to Micro-ATX based GD04 and GD05, yet capable of fitting most important full size standard components including wider ATX motherboards (SSI-CEB) such as ROG or other gaming-centric models. All drive cages have been designed similarly to those from the popular ML03 case to provide maximum flexibility in drive configuration without the need for additional adapters. For cooling, all positive pressure and smooth airflow designs were retained from previous Grandia models while improvements were made to filter access for even easier maintenance. With the GD09, there has never been a more attractively sized HTPC case that is as capable and user-friendly. So whether one is looking to build an affordable or a powerful PC, this case can definitely satisfy both ends of the requirement.
|
Beautifully crafted and engineered to maximize cooling potential with its amazing expansion flexibiltiy, the Enthoo Pro is the budget friendly mid-tower from Phanteks. Embracing many features from the Enthoo Primo, without the price tag. This case has mulitple radiator support, removable ssd bracket, closed HDD panel, and velcro cable management. The Enthoo Pro, trying to establish its own solid reputation like the award winning Enthoo Primo.
Features:
Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks’ new redesigned and better performing SP series fans. Budget friendly case, Phanteks’ Enthoo Pro, unleash unlimited possibilities.
|
The Grandia GD10, along with GD09, is a culmination of SilverStone’s decade-long experience in HTPC case design and manufacturing into a product that every PC enthusiast can enjoy. The incredible efficiency in which it utilizes all available space results in a case that is close in size externally to Micro-ATX based GD04 and GD05, yet capable of fitting most important full size standard components including wider ATX motherboards (SSI-CEB) such as ROG or other gaming-centric models. All drive cages have been designed similarly to those from the popular ML03 case to provide maximum flexibility in drive configuration without the need for additional adapters. For cooling, all positive pressure and smooth airflow designs were retained from previous Grandia models while improvements were made to filter access for even easier maintenance. With the addition of a lockable front door, the GD10 offers an attractively sized case that is capable and user-friendly for those interested in building a system with extra security and application that exceeds typical PC or HTPC environments.
- Lockable front door ensures security of system and drives
- Positive air pressure design for excellent cooling/quietness and dust-prevention
- Support expansion cards up to 12.2 inches
- Support ATX motherboards
- Quick access filters included
- Incredible 362mm depth to fit comfortably inside home theater cabinet
- Drive cages with multi-purpose mounts eliminate need for adapters
|
|
Short Description
|
E-ATX, ATX, Micro-ATX, ITX, Steel, Plastic, Glass, 464 x 303 x 476 mm, 11.84 kg
|
Micro ATX, Mini-DTX, Mini-ITX, USB 3.0, MIC
|
Micro ATX/Mini ITX, 3.5" x 8, 2.5" x 2, 3.5"/2.5" x 2, USB 3.0
|
ATX, Micro-ATX, 4.2kg, Black
|
Enthoo Pro, 7x 2.5", 6x 3.5", 3x 5.25", USB 2.0, USB 3.0
|
GD10, ATX, Micro-ATX, 2 x 3.5", 1 x 5.25", 2 x USB 3.0
|
