|
Description
|
High-performance mid tower case with a full tempered glass side panel to showcase the inside of your rig. Bring your case to life with a stylish ARGB design in the front panel of the case. Supports liquid cooling in the front, top, and rear of the case for maximum efficiency cooling. Comes equipped with two 12cm ARGB fans in the top and one 12cm ARGB fan in the rear of the case. Addressable RGB fans can be controlled using one of two ways: RGB LED control button or Addressable RGB motherboard. Includes a 6-Port ARGB control hub to connect and control your ARGB fans. THREE 12CM ADDRESSABLE RGB FANS INCLUDED Comes equipped with two 12cm ARGB fans in the top and one 12cm ARGB fan in the rear of the case. Duo 12 Fans Featuring Double RGB LED rings around the fan and circling the center, the Duo 12 ARGB fan delivers a stylish and vibrant lighting experience while keeping your system cool. ADDRESSABLE RGB COMPATIBLE Control your Addressable RGB using compatible ARGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion (with 5V 3-Pin ARGB header). Addressable RGB can be controlled using any of two ways: LED control button or ARGB motherboard. 6-PORT RGB CONTROL HUB Features a 6-port hub with PWM control functions and allows you to connect up to six 6-Pin AeroCool Addressable RGB fans and up to two 3-Pin Addressable RGB accessories with +5V ARGB connector. Access 16.8 million colors using compatible Addressable RGB motherboard (Asus Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion). PWM COMPATIBILITY Please check if the 4-Pin fan header on your motherboard is PWM compatible. - PWM based – PWM compatible - Voltage based – not PWM compatible For more information, refer to our PWM Compatibility Guide. IMPROVED AIR VENTILATION Air vents in the front panel increase air flow and ventilation to keep your system cool. FULL TEMPERED GLASS SIDE PANEL Comes equipped with a full tempered glass side panel to showcase the inside of your rig and put your components on display. AIR COOLING Supports air cooling in the front, top, and rear of the case to enhance cooling performance. - Front: 120mm x 3 or 140mm x 2 (Max.) - Top: 120mm x 2 (12cm ARGB fan x 2 included) - Rear: 120mm x 1 (12cm ARGB fan x 1 included) - PSU Shroud: 120mm x 2 (Max.) LIQUID COOLING Supports liquid cooling in the front, top, and rear of the case for maximum efficiency cooling. - Front: 120/240/360mm Radiator (Optional) - Top: 120/240mm Radiator (Optional) - Rear: 120mm Radiator (Optional) DUAL CHAMBER DESIGN Built with a dual chamber design to direct heat away from the main chamber for more effective all-around cooling. BUILT FOR HIGH PERFORMANCE - Supports ATX, Micro-ATX, and Mini-ITX motherboards - Supports CPU coolers up to 161mm - Supports graphics cards up to 326mm CONVENIENT ACCESS TO YOUR MEDIA Quick and easy access to 2 x USB 3.0, HD audio and mic ports, and power button. STORAGE CAPABILITY Supports up to: - 2 x 3.5” HDDs (1 x 3.5” and 1 x 3.5”/2.5″) - 3 x 2.5” SSDs (2 x 2.5” and 1 x 2.5”/3.5”) EASY MAINTENANCE Removable dust filters on the front, top, and bottom of the case for convenient cleaning and maintenance.
|
The Node 304 features a unique modular interior for outstanding configurability. The Node 304 accommodates up to six hard drives. Unused mounting brackets can be removed to allow for long graphic cards, additional airflow or more space for organizing cables. Additionally, it is equipped with three hydraulic bearing fans, easy-to-clean air filters in all intakes and two front USB 3.0 ports. Featuring hybrid functionality, the Node 304 case is ideally used as a cool-running file server, a stylish and quiet home theatre PC or a powerful gaming system highlighting minimalistic and stunning Scandinavian design and maximum functionality. Key features - Compact, modular interior - Minimalistic design with an elegant aluminum front panel - Unique new modular mounting system that accommodates up to 6 hard drives - Accommodates tower CPU coolers and single-fan water cooling systems - Filtered air intakes ensure a dust-free environment for internal components - Three Silent Series R2 hydraulic bearing fans included - Excellent cooling for all components - Accommodates ATX power supplies - Fan controller for all fans included - USB 3.0 for fast file transfers
|
Introduction
Continuing where the popular Grandia GD05 left off, the Milo ML03 HTPC case again combines the full size features of Grandia series with small form factor dimensions. The slimmer Milo ML03 has a profile of 105mm height and 340mm depth, making it extremely easy to integrate into any living room furniture. Incredibly, this case can accommodate up to three 3.5” hard drives or five 2.5” HDD/SSD through its smartly designed drive cages that can mount either size without any use of adapters. For cooling, the ML03 can be fitted with up to four 80mm fans so users can choose to build a quiet system with low power components or a powerful HTPC with 140W CPU if needed. There are also numerous small touches including pre-cut hole for VGA (D-SUB) connector, Kensington lock support, and an additional full size expansion slot for installing extra motherboard I/O, fan controller, or accessories products such as CLEARCMOS. For those looking to build an HTPC with good expansion and cooling capability but has limited room and budget, the SilverStone Milo ML03 is the one to get.
Special Feature
- Support up to four 80mm fans
- Drive cages with multi-purpose mounts eliminate need for adapters
- Easy to install and cable route
- Support standard PS2(ATX) power supplies
- Support low profile expansion cards
- Includes two USB 3.0 ports
|
The Node 804 is a micro ATX chassis which focuses on cooling performance and maximum configurability, all packed in an interesting new form factor with Scandinavian elegant design.
The dual chamber layout separates hot running components from the cooler ones and allows for unrestricted airflow over the motherboard, processor and graphics card.
The case comes with three excellent 120mm fans but can be upgraded with several additional fans if needed.
Featuring plenty of options for placing water cooling components, tall heat sinks and hard drives.
The flexibility of this case really gives the users the possibility to create their optimal system build.
|
After bringing Mini-ITX into mainstream DIY (do it yourself) market in 2009 with the Sugo SG05, SilverStone is looking to define the category again with SG13, a newly evolved design that aims to satisfy every type of computer users. At only 11.5 liters in size, it has suitably small statue for easily integrating into numerous computing environments and will comfortably fit many standard components for general purpose or office builds. For enthusiasts and in keeping with Sugo series’ famed tradition, the SG13’s ability to fit 10.5” long expansion card, standard ATX power supply, and all-in-one liquid cooler in 120mm or 140mm size will help produce amazingly small and powerful systems.
|
After bringing Mini-ITX into mainstream DIY (do it yourself) market in 2009 with the Sugo SG05, SilverStone is looking to define the category again with SG13, a newly evolved design that aims to satisfy every type of computer users. At only 11.5 liters in size, it has suitably small statue for easily integrating into numerous computing environments and will comfortably fit many standard components for general purpose or office builds. For enthusiasts and in keeping with Sugo series’ famed tradition, the SG13’s ability to fit 10.5” long expansion card, standard ATX power supply, and all-in-one liquid cooler in 120mm or 140mm size will help produce amazingly small and powerful systems.
|
|
Short Description
|
Mid Tower, ATX/micro ATX/mini-ITX, 210 x 440 x 330mm
|
Node 304, Mini ITX/ DTX, 2 expansion slots, 6 x 3.5"
|
Micro ATX, Mini-DTX, Mini-ITX, USB 3.0, MIC
|
Micro ATX/Mini ITX, 3.5" x 8, 2.5" x 2, 3.5"/2.5" x 2, USB 3.0
|
Sugo, Mini Tower, 3.5” x 1, 2.5” x 1, 2.47 Kg
|
Mini-DTX/Mini-ITX, 2 x USB 3.0
|
